Silver Horse RC
$14.95
3D printed • 10 colors • Built for 1/28 scale racers
Every racer’s been there, partner. You roll into the pits, flip open your bag, and it’s a stampede in there: motors rattling around, AAAs scattered like tumbleweeds, a diff that’s wandered off somewhere south of your tire bag. By the time you’ve rounded it all up, they’re calling your heat.
Well, there’s a new sheriff in the pits.
The Silver Horse RC Modular Storage & Travel System is a complete, 3D-printed, purpose-built organization line made from the ground up for 1/28 scale racers. Every case has its own specialized carrier insert for a specific job (batteries, motors, diffs or loose parts), and every module rides together as one system. Build the setup your racing needs today and add to it as your program grows.
Wrangle one. Round up the whole herd. Ride organized.
Every gunslinger needs a reliable sidearm, and the 10 Shooter is yours. Ten 2S LiPo packs ride holstered in their own dedicated slots, fully loaded and ready to draw. And here’s the trick that’ll make the whole pit look twice: the 10 Shooter turns into a battery charging dock. Add Silver Horse charging cables (sold separately) and your holster becomes your charging station. Pull it out, plug in and charge right from the case. No loose packs and no tangle of leads.
Load it. Holster it. Charge it.
Box Stock riders, this one’s yours. Twenty-four AAA cells rounded up and accounted for, so you always know which are fresh, which are charged and which are done for. No more cells rolling around the bottom of your bag like loose change at the saloon.
A well-tuned diff deserves better than a zip bag. Eight dedicated slots keep every diff in its own stall, so your high-grip build stays apart from your low-grip build. Swap setups between rounds faster than a quick-draw.
Your everyday trail rider. Six motors, each in its own slot, safe on the road and easy to pick out at the pit table. It also has a built-in open tray that’s perfect for a spare ESC, or for a motor and ESC already wired together and ready to drop in. If something goes down between rounds, you swap the whole package and you’re back in the saddle before the next heat.
Bring your race motor, your backup and something for every class you’re entered in.
For the big outfit: the multi-class racer, the collector, or the fella the whole pit row borrows from. Fourteen motors in one case, every one protected and every one easy to find. Your whole motor stable, all in one corral.
Built to carry square-profile motors safe and snug. If square motors are part of your program, this is their home on the range.
Not everything fits in a stall. The Double Open Tray is your chuck wagon for everything else: screws, spacers, tires, small parts, tools and all the little bits that’d otherwise vanish into the track carpet. It’s open, versatile and ready for whatever the trail throws at you.
’Cause no two riders pack their saddlebags the same way.
✅ Mix and match just the modules you need
✅ Add to the herd anytime as you pick up classes, cars and gear
✅ Every module works together in one consistent system
✅ Purpose-built for 1/28 scale, not borrowed from somebody else’s ranch
✅ Faster setup and teardown means more time racing and less time searching
Running one class? Strap on a 10 Shooter and a 6-Motor case and hit the trail. Racing four classes at a Grand Prix? Saddle up the whole system and ride in like you own the place.
Built to Ride Together
Any six Modular Storage cases slide perfectly into the Silver Horse RC Packing Cube and travel snug and secure, with no rattling and no wasted space. That’s no accident, partner: every Silver Horse product is made to work together. Mix and match any six modules, load the cube, zip it shut and toss it in your pit bag.
https://silverhorserc.com/products/silver-horse-rc-packing-cube
Black • White • Grey • Blue • Light Blue • Red • Purple • Green • Yellow • Orange
Brand your herd. Match your team colors, color-code your gear or ride in wearing every color on the range. Keep your motors in red, your diffs in blue and your batteries in green, and you’ll know what’s in every case from across the pit. However you run your outfit, trick it out your way.
Every case in the system is 3D printed, and that’s no accident.
Light in the saddle. Your pit bag’s heavy enough already. Printed cases carry your gear without the weight of solid metal, so they’re easier to haul from the truck to the pits and back.
Easy on the wallet. Machined aluminum is mighty pretty, right up until you see the price tag. 3D printing gets you precision-fit, purpose-built storage for a fraction of the cost, so you can round up the whole herd, not just one case.
Tough as old leather. These cases are made for real race days: packed, hauled, set up, torn down, and back at it the next weekend.
Colors machined aluminum can’t touch. Ten colors means you can customize, color-code and trick out your pit in ways a machined case never could.
A snug fit. Each insert is shaped around exactly what it holds (motors, diffs, 2S packs and AAA cells), so everything rides tight and secure.
Lighter. Smarter. More colorful. Built to ride.
Silver Horse RC lives at the track. We designed this system around how racers really pack, travel and work the pits, because we needed it too. It’s the same care that goes into every Silver Horse product, now applied to the gear that carries everything else.
Pack smarter. Haul lighter. Ride organized.Â
Round up your system today at silverhorserc.com
Note: Silver Horse charging cables are required for the 10 Shooter’s charging-dock feature and are sold separately.
Silver Horse RC
$14.95
3D printed • 10 colors • Built for 1/28 scale racers
Every racer’s been there, partner. You roll into the pits, flip open your bag, and it’s a stampede in there: motors rattling around, AAAs scattered like tumbleweeds, a diff that’s wandered off somewhere south of your tire bag. By the time you’ve rounded it all up, they’re calling your heat.
Well, there’s a new sheriff in the pits.
The Silver Horse RC Modular Storage & Travel System is a complete, 3D-printed, purpose-built organization line made from the ground up for 1/28 scale racers. Every case has its own specialized carrier insert for a specific job (batteries, motors, diffs or loose parts), and every module rides together as one system. Build the setup your racing needs today and add to it as your program grows.
Wrangle one. Round up the whole herd. Ride organized.
Every gunslinger needs a reliable sidearm, and the 10 Shooter is yours. Ten 2S LiPo packs ride holstered in their own dedicated slots, fully loaded and ready to draw. And here’s the trick that’ll make the whole pit look twice: the 10 Shooter turns into a battery charging dock. Add Silver Horse charging cables (sold separately) and your holster becomes your charging station. Pull it out, plug in and charge right from the case. No loose packs and no tangle of leads.
Load it. Holster it. Charge it.
Box Stock riders, this one’s yours. Twenty-four AAA cells rounded up and accounted for, so you always know which are fresh, which are charged and which are done for. No more cells rolling around the bottom of your bag like loose change at the saloon.
A well-tuned diff deserves better than a zip bag. Eight dedicated slots keep every diff in its own stall, so your high-grip build stays apart from your low-grip build. Swap setups between rounds faster than a quick-draw.
Your everyday trail rider. Six motors, each in its own slot, safe on the road and easy to pick out at the pit table. It also has a built-in open tray that’s perfect for a spare ESC, or for a motor and ESC already wired together and ready to drop in. If something goes down between rounds, you swap the whole package and you’re back in the saddle before the next heat.
Bring your race motor, your backup and something for every class you’re entered in.
For the big outfit: the multi-class racer, the collector, or the fella the whole pit row borrows from. Fourteen motors in one case, every one protected and every one easy to find. Your whole motor stable, all in one corral.
Built to carry square-profile motors safe and snug. If square motors are part of your program, this is their home on the range.
Not everything fits in a stall. The Double Open Tray is your chuck wagon for everything else: screws, spacers, tires, small parts, tools and all the little bits that’d otherwise vanish into the track carpet. It’s open, versatile and ready for whatever the trail throws at you.
’Cause no two riders pack their saddlebags the same way.
✅ Mix and match just the modules you need
✅ Add to the herd anytime as you pick up classes, cars and gear
✅ Every module works together in one consistent system
✅ Purpose-built for 1/28 scale, not borrowed from somebody else’s ranch
✅ Faster setup and teardown means more time racing and less time searching
Running one class? Strap on a 10 Shooter and a 6-Motor case and hit the trail. Racing four classes at a Grand Prix? Saddle up the whole system and ride in like you own the place.
Built to Ride Together
Any six Modular Storage cases slide perfectly into the Silver Horse RC Packing Cube and travel snug and secure, with no rattling and no wasted space. That’s no accident, partner: every Silver Horse product is made to work together. Mix and match any six modules, load the cube, zip it shut and toss it in your pit bag.
https://silverhorserc.com/products/silver-horse-rc-packing-cube
Black • White • Grey • Blue • Light Blue • Red • Purple • Green • Yellow • Orange
Brand your herd. Match your team colors, color-code your gear or ride in wearing every color on the range. Keep your motors in red, your diffs in blue and your batteries in green, and you’ll know what’s in every case from across the pit. However you run your outfit, trick it out your way.
Every case in the system is 3D printed, and that’s no accident.
Light in the saddle. Your pit bag’s heavy enough already. Printed cases carry your gear without the weight of solid metal, so they’re easier to haul from the truck to the pits and back.
Easy on the wallet. Machined aluminum is mighty pretty, right up until you see the price tag. 3D printing gets you precision-fit, purpose-built storage for a fraction of the cost, so you can round up the whole herd, not just one case.
Tough as old leather. These cases are made for real race days: packed, hauled, set up, torn down, and back at it the next weekend.
Colors machined aluminum can’t touch. Ten colors means you can customize, color-code and trick out your pit in ways a machined case never could.
A snug fit. Each insert is shaped around exactly what it holds (motors, diffs, 2S packs and AAA cells), so everything rides tight and secure.
Lighter. Smarter. More colorful. Built to ride.
Silver Horse RC lives at the track. We designed this system around how racers really pack, travel and work the pits, because we needed it too. It’s the same care that goes into every Silver Horse product, now applied to the gear that carries everything else.
Pack smarter. Haul lighter. Ride organized.Â
Round up your system today at silverhorserc.com
Note: Silver Horse charging cables are required for the 10 Shooter’s charging-dock feature and are sold separately.
Secure payment
Your transaction is protected with advanced security measures to keep your information confidential.
$14.95
$14.95
